 |
 |
 |
|
The 48-port 10/100/1000BaseT switching module provides 48 switched, 10/100/1000-Mbps autosensing, full- or half-duplex ports. The module has 48 RJ-45 connectors for use with either Category 3, Category 5, Category 5e, or Category 6 UTP cable. This module can be upgraded with an inline-power daughter card to support IP phones. Features Full duplex capability, auto-negotiation, VLAN support Compliant Standards IEEE 802.3, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802. System Requirements Cisco IOS Device Type Switch; Form Factor Plug-in module Ports Qty 48 x Ethernet 10Base-T, Ethernet 1000Base-TX, Ethernet 100Base-TX
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Technical Specifications:
- Device Type: Switch - 48 ports - Managed
- Enclosure Type: Plug-in module
- Compatible Slots: 1 x Expansion Slot
- Ports: 48 x 10/100/1000
- Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3
- Features: Full duplex capability, auto-negotiation, VLAN support, Quality of Service (QoS)
- Compliant Standards: IEEE 802.3, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s
- Status Indicators: Port status, link activity, power, Boot State, fail
- Interfaces: 48 x 10Base-T/100Base-TX/1000Base-TX - RJ-45
- Compliant Standards: FCC Class A certified, CSA, CISPR 22 Class A, EN 60950, IEC950, UL 1950, VCCI Class A ITE, EN55022 Class A, AS/NZS 3548, FCC CFR21 Part 1040, EN 60825, CSA C22.2 No. 950
- Min Operating Temperature: 0 °C
- Max Operating Temperature: 40 °C
- Humidity Range Operating: 10 - 90%
- Designed For: Cisco Catalyst 6500, 6503, 6506, 6506 chassis, 6509, 6509 chassis
|
|
|
|
|
|
|
