(most popular)
view all


view less



  Home > Cisco Modules and Cards >

  Cisco WS-X4516 Supervisor Engine V



Condition: New, 1 Year Warranty
* Also available in Refurbished condition for

Product price is not filled in. This product cannot be purchased.

List Price: $16,495.00

Quantity In Stock:52

Product Code: WS-X4516_NEW

Warranty Terms:
1 Year Warranty (no extra cost)

Product Information
The Cisco Catalyst 4500 Series Supervisor Engine V continues the nonblocking, robust Layer 2/3/4 switching found in previous Catalyst 4500 Series Supervisor Engines with additional performance, features and throughput, further enhancing resilient control of converged data, voice, and video networks with high availability enabling business resiliency enterprise and metropolitan (metro) Ethernet customers. Network control extends from the backbone to the edge with intelligent Layer 3 services such as granular QoS (Quality of Service), Internet security, and network management.

Due to the modular architecture, the Cisco Catalyst 4500 Series provides scalability, flexibility, and investment protection providing a "pay as you grow" model, resulting in a reduction of operational expenses and capital expenditures. The Supervisor Engine V is backward compatible with all current Cisco Catalyst 4500 Series linecards and can be used with the Cisco Catalyst 4503, 4506, 4507R, 4510R, and 4006 chassis.

Chassis and Line Card Support : The Cisco Catalyst 4500 Series Supervisor Engine V can be deployed in single-chassis, nonredundant mode in the Cisco Catalyst 4503/4503-E and Cisco Catalyst 4506/4506-E chassis, or in redundant mode as an option in the Cisco Catalyst 4507R (slots 1 and 2)/4507R-E/4507R+E (slots 3 and 4) and Cisco Catalyst 4510R (slots 1 and 2)/4510R-E/4510R+E (slots 5 and 6) chassis. Table 1 shows the performance of the Supervisor Engine V for each chassis.
Predictable Performance and Scalability : The Cisco Catalyst 4500 Series Supervisor Engine V delivers a 96-Gbps switching fabric with a 72-mpps forwarding rate in hardware for Layer 2-4 traffic. Switching performance is independent of the number of route entries or Layer 3 and 4 services enabled. Hardware-based Cisco Express Forwarding routing architecture allows for increased scalability and performance. Table 2 provides a comparison of the performance and scalability features of all of the Cisco Catalyst 4500 Series Enhanced Layer 3 Supervisor Engines.
Supervisor Engine V Redundancy for Business Resiliency : The Cisco Catalyst 4500 Series was designed to maximize desktop user uptime, with noninterrupted hardware switching. The Cisco Catalyst 4507R, 4507R-E, 4507R+E, 4510R, 4510R-E, and 4510R+E support 1+1 supervisor redundancy, using the Supervisor Engine V. The primary supervisor is active and is responsible for normal system operation. The other supervisor serves as a secondary standby, monitoring the operation of the primary supervisor.
IPv6 Support : IPv6 is important for the future of IP networking and is critical for the expansion of IP address space in the future. IPv6 capability is required by many companies and is being mandated by governments worldwide. IPv6 has been supported on the Cisco Catalyst 4500 Supervisor Engine V since Cisco IOS Software Release 12.2(20) EW with software-based forwarding.
Technical Specifications:
  • Device Type: Control processor
  • Processors Installed: 1 x 400 MHz
  • RAM Installed ( Max ): 512 MB SDRAM
  • Hard Drive: None.
  • Form Factor: Plug-in module
  • Connectivity Technology: Wired
  • Data Link Protocol: Gigabit Ethernet
  • Switching Protocol: Ethernet
  • Network / Transport Protocol: ICMP/IP
  • Routing Protocol: OSPF, IGRP, RIP, BGP-4, RIP-2, EIGRP, IGMPv2, IGMP, DVMRP, VRRP, static IP routing, PIM-SSM, Multiprotocol BGP, policy-based routing (PBR)
  • Remote Management Protocol: SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, HTTPS, SSH, SSH-2
  • Performance: Switching capacity : 96 Gbps
  • Throughput : 72 Mbps
  • Capacity: IPv4 routes : 128000
  • QoS hardware entries : 32000
  • MAC addresses : 32000
  • Virtual interfaces (VLANs) : 4000
  • Status Indicators: Link activity, network utilization %, system
  • Features: Switching, auto-negotiation, Cisco Fast EtherChannel, load balancing, VLAN support, Cisco Gigabit EtherChannel , IGMP snooping, ISL support, Syslog support, Stateful switchover (SSO), Spanning Tree Protocol (STP) support, Per-VLAN Spanning Tree (PVST), DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Dynamic Buffer Limiting (DBL), Jumbo Frames support
  • Authentication Method: Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
  • Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
  • Expansion Slot(s): 2 (total) / 2 (free) x GBIC
  • Interfaces: 1 x management - console - RJ-45, 1 x management - Ethernet 10Base-T/100Base-TX - RJ-45
  • Compatible Slots: 1 x Expansion Slot
  • Compliant Standards: FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, ICES-003, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, AS/NZS 3260, EN50204, AS/NZ 3548 Class A
  • Service & Support: 90 days warranty
  • Service & Support Details: Limited warranty - replacement - 90 days
  • Min Operating Temperature: 0 C
  • Max Operating Temperature: 40 C
  • Humidity Range Operating: 10 - 90%
  • Max Altitude Operating: 2 km
  • Designed For: Cisco Catalyst 4006, 4006 Chassis, 4503, 4506, 4507R, 4510R